Due to the holidays we are closed from: Tuesday December 23rd to Sunday January 4th 2026. Your orders will then be shipped the following Monday (or Thursday). We thank you for your understanding.
With this Hörmann pedestrian door contact STK 2, a pedestrian door on a Berry up-and-over door N 80/DF 98 can be secured. This prevents the drive from moving (up) when the pedestrian door is open. The brackets allow relatively flexible installation of the pedestrian door contact.
The pedestrian door contact STK 2 is only suitable for door operators of series 2 and 3 with an X30 system box.
The pedestrian door contact and the magnet are attached to the garage door and pedestrian door so that they are exactly opposite each other. In this position, the stop circuit is closed. If the door is opened, the stop circuit is also interrupted and the door cannot be opened. If the door is opened during a door movement, the door stops immediately.
The Hörmann AT 2-door connection unit is required for operation and must be ordered separately! The pedestrian door contact can only be connected to the drive via the AT2 connection unit. Since the AT 2 must be connected to the drive via a system cable, only drives with a system socket X30 are automatically suitable. At present, these are ProMatic and SupraMatic drives from series 2 and 3 and the Ecostar Liftronic 700_II & 800_II. After the pedestrian door contact STK 2 has been mounted on the up-and-over door and the pedestrian door and the system cable has been laid, it is simply connected to the system bus X31 on the AT2 circuit board or the SKS circuit board.
| EAN-code (13) | 4042533336368 |
|---|---|
| Brand | Hörmann |
| Compatible drive model | Hörmann Ecostar 700-II, Hörmann Ecostar 800-II, Hörmann ProMatic 2, Hörmann ProMatic 3, Hörmann ProMatic 4, Hörmann ProMatic 4 Akku, Hörmann SupraMatic 2, Hörmann SupraMatic 3, Hörmann SupraMatic E Serie 4 |
Click on one of the drives below to view compatible products.
