Your Language:

Remote Sommer Pearl Vibe V000

58,06
Add to Compare
Availability
In stock
  • Contact us for large amounts (100+)

  • Unlimited online support

Remote Sommer TRX55-868-4 with 4 channels on 868MHz

Modern 4-channel remote with simple but modern buttons for easy use.

This remote is suited for controlling receivers and openers by the brand Sommer

  • Suited for the 868MHz SOMloq2 (128Bit AES) coding

This bidirectional 4-channel remote on 868MHz rolling is super secure thanks to the 128 bit AES encryption. This transmitter can send and receive: when your signal is picked up by the receiver, the Pearl Vibe will vibrate so you know the door is really opening or closing. Press down the button 3 seconds long, and the remote will repeat the signal 5 times.
Hop-function: Every SOMloq2 receiver sends recognized commands through for max. 2 times.
Pearl Vibe remotes have a gate position indicator.
The before mentioned functions only work when using a new SOMloq2 receiver that has been configured for these signals.

NOTE: These remotes come with an INTERNATIONAL region code and only work with devices that come with the same region code.
On the image below, you can clearly see the region code inside the orange rectangle. The region code of the Pearl Vibe isV000. Does your current remote come with the same region code? Then this new remote is compatible with your installation.

Region codes

Code
Region
4019V000
International
4019V078 (Belisol)
BeNeLux
4019V203 (De Goeij Deuren)
BeNeLux
4019V305 (Rekers)
International
4019V656
BeNeLux
4019V657 (Matex)
BeNeLux
4019V674 (Different Doors)
BeNeLux
4019V683 (VDB Poorten)
BeNeLux

Pearl_Regiocode000

Programming your remote

Program directly to the receiver. Consult the manual of your controller/opener/receiver.

Switching between SOMloq and SOMloq2 coding

Basically, this remote is ready to be used with an 128Bit receiver (SOMloq2) and the LED light will be orange/amber. By holding down the button longer, the LED light will turn red and the remote will switch to 64Bit (SOMloq1)

If the remote has been coupled to an older SOMloq1 receiver, and you then program it to the new SOMloq2 receiver, it will no longer function on the old receiver. If you then press down the button for 3 seconds, the remote will go to repeater mode and will transmit 5 times for about 15 seconds long.

If you couple the remote with a SOMloq2 receiver first, then you have to push the button 5 times before you can switch it back to SOMloq1 mode. When doing this, make sure to be out of the reach of your SOMloq2 receiver.

General

Number of pushbuttons 4
Radio Frequency 868MHz
Color of button Black
Color of LED Yellow or Amber
Radio code Sommer SOMloq2 (128Bit AES) International-code
Number of channels 4
Rolling code? Yes
Self learning? Yes
Homelink compatibel? No
Battery type CR2032 3V Lithium
Brand Sommer