The JCM NEO 20 is a 2-channel remote that functions on the frequency of 433MHz. Thanks to the rolling code technology, this is a secured remote.
Important to know:
Only compatible with the extensions DSC, SEC or PAP.
Does your current remote have a green LED? Then it functions on 868MHz and can't be replaced with this remote.
Do you have a remote with the name BAM Bormet, Hormann, Doortec, WPS, or another installer? Then your remote has an installers code and can't be replaced with a remote from us.
Programming your remote:
Quick programming "PIN-MODE"
Stand 2-4 meters from the receiver.
Push the button on the backside of your remote with the point of pen. The receiver will force out a long high tone, and the remote will be programmed.
(*) Only applicable in conventional romance.
This device conforms to the guidelines of 1999/5/EG
Is your controller not marked with "PIN-MODE" and do you have an already working remote? Then you can program other remotes by following the manual:(*)
Standard programming
At a distance of 2 to 4 meters, push the button on the backside of your remote with the point of pen or something equally pointy. The receiver will force out a long high tone, and the remote will be programmed.
In order to program the remote, you have to hold down the button for 10 seconds. As confirmation, the receiver will sound out a short high tone.
After 10 seconds you will hear 2 short high tones and the receiver will automatically exit the programming mode.